Easy Installation And Management - NETGEAR ProSafe FVS338 Reference Manual

Reference Manual for the ProSafe VPN Firewall 50 FVS338
• IP Address Sharing by NAT
The FVS338 VPN firewall allows several networked PCs to share an Internet account using
only a single IP address, which may be statically or dynamically assigned by your Internet
service provider (ISP). This technique, known as NAT, allows the use of an inexpensive
single-user ISP account.
• Automatic Configuration of Attached PCs by DHCP
The FVS338 VPN firewall dynamically assigns network configuration information, including
IP, gateway, and domain name server (DNS) addresses, to attached PCs on the LAN using the
Dynamic Host Configuration Protocol (DHCP). This feature greatly simplifies configuration
of PCs on your local network.
• DNS Proxy
When DHCP is enabled and no DNS addresses are specified, the firewall provides its own
address as a DNS server to the attached PCs. The firewall obtains actual DNS addresses from
the ISP during connection setup and forwards DNS requests from the LAN.
• PPP over Ethernet (PPPoE)
PPPoE is a protocol for connecting remote hosts to the Internet over a DSL connection by
simulating a dial-up connection. This feature eliminates the need to run a login program such
as EnterNet or WinPOET on your PC.

Easy Installation and Management

You can install, configure, and operate the FVS338 ProSafe VPN Firewall 50 within minutes after
connecting it to the network. The following features simplify installation and management tasks:
• Browser-based management
Browser-based configuration allows you to easily configure your firewall from almost any
type of personal computer, such as Windows, Macintosh, or Linux. A user-friendly Setup
Wizard is provided and online help documentation is built into the browser-based Web
Management Interface.
• Smart Wizard
The FVS338 VPN firewall automatically senses the type of Internet connection, asking you
only for the information required for your type of ISP account.
• VPN Wizard
The FVS338 VPN firewall includes the NETGEAR VPN Wizard to easily configure VPN
tunnels according to the recommendations of the Virtual Private Network Consortium (VPNC)
to ensure the VPN tunnels are interoperable with other VPNC-compliant VPN routers and
clients.
2-4
January 2005
Introduction