Enabling Dhcp To Automatically Configure Tcp/Ip Settings; Dhcp Configuration Of Tcp/Ip In Windows Xp - NETGEAR ProSafe FVS338 Reference Manual
Vpn firewall 50
Hide thumbs
Also See for ProSafe FVS338:
- Reference manual (200 pages) ,
- Application note (5 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Reference Manual for the ProSafe VPN Firewall 50 FVS338
Enabling DHCP to Automatically Configure TCP/IP Settings
You will find there are many similarities in the procedures for different Windows systems when
using DHCP to configure TCP/IP.
The following steps will walk you through the configuration process for each of these versions of
Windows.
DHCP Configuration of TCP/IP in Windows XP
Locate your Network Neighborhood icon.
•
Select Control Panel from the Windows XP new Start Menu.
•
Select the Network Connections icon on the Control Panel. This will take you to the next
step.
• Now the Network Connection window
displays.
The Connections List that shows all the
network connections set up on the PC,
located to the right of the window.
• Right-click on the Connection you will
use and choose Status.
C-8
January 2005
Preparing Your Network
Advertisement
Table of Contents
Troubleshooting
