Configuring Lan Tcp/Ip Setup Parameters - NETGEAR ProSafe FVS338 Reference Manual
Vpn firewall 50
Hide thumbs
Also See for ProSafe FVS338:
- Reference manual (200 pages) ,
- Application note (5 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Reference Manual for the ProSafe VPN Firewall 50 FVS338
Figure 6-1: LAN IP Setup menu
Note: Once you have completed the LAN IP setup, all outbound traffic is allowed and all
inbound traffic is discarded. To change these traffic rules, refer to
Protection and Content
Configuring LAN TCP/IP Setup Parameters
LAN TCP/IP Setup—The default values are suitable for most users and situations. These are
advanced settings that you may configure if you are a network administrator. RIP is applicable if
your network contains multiple routers.
•
IP Address: Type the IP address of your router (factory default: 192.168.1.1).
Make sure that LAN Port IP address and DMZ port IP address are in different subnets.
6-2
Filtering.
January 2005
Chapter 7, "Firewall
LAN Configuration
Advertisement
Table of Contents
Troubleshooting
