The Router's Front Panel - NETGEAR ProSafe FVS338 Reference Manual

Reference Manual for the ProSafe VPN Firewall 50 FVS338
• Warranty and Support Information Card.
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the firewall for repair.
Router's Front Panel
The
The FVS338 ProSafe VPN Firewall 50 front panel shown below contains the status LEDs.
ProSafe VPN Firewall
PWR
Power Test Modem
LED LED LED
Figure 2-1: FVS338 Front Panel
You can use the LEDs to verify various conditions.
front panel of the router and its operation.
Table 2-1. Object Descriptions
Object Activity
Power LED On (Green)
Off
Test LED On (Amber)
Blinking (Amber)
Off
MDM LED On (Green)
Blinking (Green)
Off
2-6
100
1 2
TEST MDM LINK/ACT
INTERNET
Internet
LEDs
Description
Power is supplied to the router.
Power is not supplied to the router.
Test mode: The system is initializing or the initialization has failed.
Writing to Flash memory (during upgrading or resetting to defaults).
The system has booted successfully.
The serial port detected a link with an attached modem.
Server data is being transmitted or received by the serial port.
The serial port has no link.
January 2005
3 4 5 6 7
LOCAL
Local
LEDs
Table 2-1 lists and describes each object on the
MODEL FVS338
100
8
LINK/ACT
Introduction