Restarting The Network - NETGEAR ProSafe FVS124G Reference Manual

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports

Restarting the Network

Once you've set up your computers to work with the firewall, you must reset the network for the
devices to be able to communicate correctly. Restart any computer that is connected to the
FVS124G VPN Firewall.
After configuring all of your computers for TCP/IP networking and restarting them, and
connecting them to the local network of your FVS124G VPN Firewall, you are ready to access and
configure the firewall.
Preparing Your Network C-21
202-10085-01, March 2005