Restarting The Network - NETGEAR FVS328 Reference Manual

Model FVS328 ProSafe VPN Firewall with Dial Back-up Reference Manual

Restarting the Network

Once you have set up your computers to work with the firewall, you must reset the network for the
devices to be able to communicate correctly. Restart any computer that is connected to the firewall.
After configuring all of your computers for TCP/IP networking and restarting them, and
connecting them to the local network of your FVS328 Firewall, you are ready to access and
configure the firewall.
D-12 Preparing Your Network
May 2004, 202-10031-01