Advertisement
Flush through 5 litres of clean
water through each water
option immediately after
installing and before use.
CO2 Bottle Installation (Sparkling Versions Only)
IMPORTANT! ALWAYS ENSURE SECURITY CLIPS ARE USED ON ALL WATER AND CO2
CONNECTIONS.
Attach the regulator to the
disposable CO2 bottle,
ensuring the regulator is closed.
When the cold water switch is
turned on, the cold water
indicator will be lit.
Connect the assembled CO2
bottle and regulator to the
machine using 1/4 inch pipe.
The temperature of cold water
can be set from 4c to 11c.
Allow up to 1 hour for the water
to reach its minimum
temperature.
After completing the water
installation, turn on the sparkling
power switch and the pump will
run. Do not open the regulator
valve until the carbonated
switch has been turned on.
Advertisement
