Download Print this page

Borg & Overstrom B4.2 Install & Operation Manual page 15

Advertisement

Please note that this
sanitisation fluid
contains an active
caustic/alkaline agent.
Leak Detection (power cut-off) - All variants. Enhanced Leak Detection (Flood
Prevention) Availiable as Optional Extra.
NOTE: If this machine is equipped with a leak detection device. When leaking is detected the dispense
operation will be cut off automatically.
To reset:
Unplug the machine.
Avoid skin contact and
wear protective gloves
when handling
sanitisation fluids.
Locate the source of leakage
and rectify.
Always use responsibly
and with care
remembering that due
to its alkaline nature
unnecessary
concentrated/prolonge
d contact with any
materials, including
metals, can cause
damage. Always rinse
all contact surfaces
after use with clean
water.
Locate the detection probe
which can be found in the
bottom rear left hand corner. Dry
the probes and internal area
with a dry cloth.
In the event of any skin
contact, flush
immediately with
clean, cold water.

Advertisement

loading