Table of Contents
Advertisement
Remote Wiring Connections and Setup
A remote may be wired to provide an "On-Off" switching function (two wire) or as a three-way
"Pool-Off-Spa" selector switch (three wire).
Modern automation systems use a two-wire configuration and can operate the heater in
either Pool or Spa mode (see remote wiring on page 22). Water temp will not exceed the
setting on the heater, regardless of the automation set temp.
To access the full range of temp settings with the remote, the heater should be set (at the
control pad) to the maximum safe temperature.
20
Part Number 652187
Remote Wire
Pool
Spa
24V Hot
Wire Harness Connection
Advertisement
Table of Contents
