Njoy Aster Series User Manual page 24

Converter
005
Mode
EPO/
006
ROO***
EBM
007
Number****
Bypass
008 when UPS
is Off
009 Buzzer
NCL
010
Output*****
*) When operating in ECO Mode, the efficiency of UPS is higher than that in online mode,
but transfer time should not be 0ms.
**) When operating in Converter Mode, the frequency of output should be always 50Hz or
60Hz, but load capacity will be derated.
*) This function would be set as 0% when Converter Mode is enabled.
lighting during setting ECO mode.
**) UPS has no bypass when Converter Mode is enabled.
setting bypass mode.
***) ROO (Remote On/Off): If ROO is enabled, UPS can be turn on/off by the ROO port.
If ROO port is disconnected, UPS will be turned off. If ROO port is connected, UPS will be
turned on when the utility is normal.
****) 1. UPS cannot detect the numbers of external battery automatically, so manual
input from user is necessary.
2. For –Standard models, the maximum number is 1. Option [AbP] means 10.
*****)When NCL Output is enable, user can control non-critical outlets in Power Master. If
NCL Output is disable, UPS does not have this function.
24
DIS] (Disable) [ENA]
(Enable)
[EPo] /[Roo]
[0bP]/[1bP]/[2bP]/[3bP]/
[4bP]/[5bP]/[6bP]/[7bP]/
[8bP]/[9bP] /[AbP]
[DIS] (Disable) [ENA]
(Enable)
[DIS] (Disable) [ENA]
(Enable)
[DIS] (Disable) [ENA]
(Enable)
Disable
EPO
0 (for
Standard
models) / 1
(for Long-run
models)
Disable
Enable
Enable
+
+ Icon is lighting during
005
d,5
006
EPO
007
0bP
008
d,5
009
EnA
01 0
EnA
Icon is