+
LOAD
BATT.
2
*) When operating in ECO Mode, the efficiency of UPS is higher than that in online mode,
but transfer time should not be 0ms
**) When operating in Converter Mode, the frequency of output should be always 50Hz or
60Hz, but load capacity will be derated.
16
Line mode: lighting
Converter mode: blinking
Bypass mode
LOAD
100
75
50
25
0
BATT.
100
Battery capacity:
75
Bat mode: battery capacity
50
Line mode:
1. Battery charging: cycle lighting
25
2. Battery full charged: lighting
3. Line mode without charger: battery capacity
0
OUTPUT Program: indicate the status of outlets, if NCL
outlets is enabled, the icon will be lighting, if NCL outlets
is disable, the icon will be off.
OUTPUT Program: indicate the status of outlets, if
critical output outlets is enabled, the icon will be lighting,
if it is disabled, the icon will be off.