Vacon NXP Series User Manual page 92

CONTROL KEYPAD
Applications (S6.8.4)
At location S6.8.4 you can find the Applications submenu containing information about not only the
application currently in use but also all other applications loaded into the frequency converter. The
information available is:
Page
6.8.4.# Name of application
6.8.4.#.1 Application ID
6.8.4.#.2 Version
6.8.4.#.3 Firmware interface
Table 9-9. Applications information pages
I/Oterm
Applications
A1
Figure 9-25. Applications info page
In the Applications information page, push the
which there are as many as there are applications loaded into the frequency converter. Locate the
application you want information about with the
pages with the Menu button right . Use again the Browser buttons to see the different pages.
Hardware (S6.8.5)
The Hardware information page provides information on the following hardware-related topics:
Page
6.8.5.1 Nominal power of the unit
6.8.5.2 Nominal voltage of the unit
6.8.5.3 Brake chopper
6.8.5.4 Brake resistor
Table 9-10. Hardware information pages
Expander boards (S6.8.6)
In the Expander boards pages you find information about the basic and option boards connected to
the control board (see Chapter 8.2).
You can check the status of each board slot by entering the Expander boards page with the
button right
and using the
Push the Menu button right
program version of the respective board when you push either one of the
If no board is connected to the slot the text 'no board' will be shown. If a board is connected to a slot
but the connection is somehow lost the text 'no conn.' is displayed. See Chapter 8.2 and Figure 8-1
and 6-16 for more information.
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com
Content
READY
Basic
A7
Content
Browser buttons
again to display the status of the board. The keypad will also display the
I/Oterm
Standard
D1 D3
READY
I/Oterm
D3
D1
Menu button right
Browser buttons
to choose the board whose status you wish to check.
vacon • 91
I/Oterm
Version
2.01
READY
I/Oterm
Application id
NXFIFF01
to enter the Application pages of
and then enter the Information
Browser buttons
Menu
.