Vacon NXP Series User Manual page 82

CONTROL KEYPAD
System Menu
Application
Standard
Figure 9-10. Change of application
9.3.6.3 Copy parameters
The parameter copy function is used when the operator wants to copy one or all parameter groups
from one drive to another or to store parameter sets in the internal memory of the converter. All the
parameter groups are first uploaded to the keypad, then the keypad is connected to another drive
and then the parameter groups are downloaded to it (or possibly back to the same drive).
Before any parameters can successfully be copied from one drive to another the drive has to be
stopped when the parameters are downloaded to it:
The parameter copy menu (S6.3) embodies four functions:
Parameter sets (S6.3.1)
The Vacon NX frequency converter features a possibility for the user to load back the factory default
parameter values and to store and load two customised parameter sets (all parameters included in
the application).
On Parameter sets page (S6.3.1), push the
LoadFactDef begins to blink and you can confirm the loading of factory defaults by pushing the Enter
button . The drive resets automatically.
Alternatively you can choose any other of the storing or loading functions with the
Confirm with the
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com
STOP READY
I/Oterm
S1 S11
STOP READY
I/Oterm
Enter button
. Wait until 'OK' appears on the display.
I/O term
Application
Standard
I/O term
Application
enter
Multi-step
Menu button right to enter the Edit menu . The text
vacon • 81
STOP READY
STOP READY
Browser buttons .