Vacon NXP Series User Manual page 84

CONTROL KEYPAD
Automatic parameter backup (P6.3.4)
On this page you can activate or inactivate the parameter backup function. Enter the edit mode by
Menu button right
pressing the
When the Parameter backup function is activated Vacon NX control keypad makes a copy of the
parameters of the presently used application. Every time a parameter is changed the keypad backup
is automatically updated.
When applications are changed, you will be asked if you wish the parameters of the new application
to be uploaded to the keypad. For this to happen, push the
of the parameters of the previously used application saved in the keypad push any other button.
Now you will be able to download these parameters to the drive following the instructions given in
chapter 9.3.6.3.
If you want the parameters of the new application to be automatically uploaded to the keypad you
have to do this for the parameters of the new application once on page 6.3.2 as instructed.
Otherwise the panel will always ask for the permission to upload the parameters.
Note: Parameters saved in the parameter settings on page S6.3.1 will be deleted when applications
are changed. If you want to transfer the parameters from one application to another you have to
upload them first to the keypad.
9.3.6.4 Parameter comparison
In the Parameter comparison submenu (S6.4), you can compare the actual parameter values to the
values of your customised parameter sets and those loaded to the control keypad.
The comparison is performed by pushing the
submenu . The actual parameter values are first compared to those of the customised parameter
Set1. If no differences are detected a '0' is displayed on the lowermost line. But if any of the
parameter values differ from those of the Set1 the number of the deviations is displayed together
with symbol P (e.g. P1 P5 = five deviating values). By pressing the Menu button right once again you
can still enter the pages where you can see both the actual value and the value it was compared to.
In this display, the value on the
the value line (lowermost) is the edited value. Furthermore, you can also edit the actual value with
Browser buttons
the
again.
In the same way, you can perform the comparison of the actual values to Set2 , Factory Settings and
Keypad Set .
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com
. Choose Yes or No with the
Description line
in the edit mode that you can reach by pushing the Menu button right once
Browser buttons
Enter button
Menu button right when in the Compare parameters
(in the middle) is the default value and the one on
vacon • 83
.
. If you wish to keep the copy