Vacon NXP Series User Manual page 83

82 • vacon
Upload parameters to keypad (To keypad, S6.3.2)
This function uploads all existing parameter groups to the keypad provided that the drive is stopped.
Enter the To keypad page (S6.3.2) from the Parameter copy menu . Push the
enter the edit mode. Use the
Enter button
. Wait until 'OK' appears on the display.
READY
Copy Parameters
P1 P4
RE ADY
Up to keypad
Wait...
Figure 9-12. Parameter copy to keypad
Download parameters to drive (From keypad, S6.3.3)
This function downloads one or all parameter groups uploaded to the keypad to a drive provided
that the drive is in STOP status.
Enter the From keypad page (S6.3.3) from the Parameter copy menu . Push the
enter the edit mode. Use the
Application parameters and press the
The procedure to download the parameters from keypad to drive is similar to that of from drive to
keypad. See above.
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com
READY
Parameter sets
Select
READY
Parameter sets
Wait...
Figure 9-11. Storing and loading of parameter sets
Browser buttons
Up to keypad
Select
Up to keypad
OK
Browser buttons
Enter button
READY
Parameter sets
LoadFactDef
READY
Parameter sets
OK
to select the option All parameters and press the
READY
Up to keypad
All param.
READY
to select either the option All parameters or
. Wait until 'OK' appears on the display.
CONTROL KEYPAD
enter
CONFIRM
CANCEL
Menu button right
READY
CONFIRM
enter
CHANGE VALUE
CANCEL
Menu button right
to
to