Vacon NXP Series User Manual page 85

84 • vacon
ParamComparison
C1 C3
Figure 9-13. Parameter comparison
9.3.6.5 Security
NOTE: The Security submenu is protected with a password. Store the password in a safe place!
Password (S6.5.1)
The application selection can be protected against unauthorised changes with the Password function
(S6.5.1).
By default, the password function is not in use. If you want to activate the function, enter the edit
mode by pushing the
password with the
Note that you can also set the password by digits. In the edit mode, push the Menu button right once
again and another zero appears on the display. Now set first the units. Then push the
left and you can set the tens etc. Finally, confirm the password setting with the
this, you have to wait until the Timeout time (P6.6.3) (see page 87) has expired before the password
function is activated.
If you now try to change applications or the password itself you will be prompted for the current
password. The password will be entered with the
Deactivate the password function by entering the value 0.
READY
I/Oterm
Password
Not in use
Figure 9-14. Password setting
Note! Store the password in a secure location! No changes can be made unless a valid password is
entered!
Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.clrwtr.com - Email: info@clrwtr.com
READY
Set1
OR
Set1
P2.1.2= 50.0
Menu button right
. A blinking zero appears in the display and now you can set a
Browser buttons
. The password can be any number between 1 and 65535.
I/Oterm
Password
READY
0
READY
P1 P6
READY
20.0 Hz
Browser buttons
READY
enter
OR:
0
CONTROL KEYPAD
READY
P2.1.2= 50.0
20.0 Hz
EDIT VALUE
CONFIRM CHANGE
enter
Menu button
Enter button
.
READY
I/Oterm
Password
00
. After
enter