Table of Contents
Advertisement
Initializing the Storage Arrays and Software
Set controller default networking.
Done with Qarray1
Starting RAID setup script for Qarray1...
Enabling IAF support.
Disable AVT in controller A
Disable AVT in controller B
Disable Parity Repair, enable fail on PFA
Created Disk_Pool_99
Reserved space for 1 hotspares in Disk_Pool_99
create TRAY_99_VOL_1 of size 15.756 TiB
Creating TRAY_99_VOL_1
Setting additional attributes for Volume TRAY_99_VOL_1.
create TRAY_99_VOL_2 of size 15.756 TiB
Creating TRAY_99_VOL_2
Setting additional attributes for Volume TRAY_99_VOL_2.
Created Disk_Pool_0
Reserved space for 1 hotspares in Disk_Pool_0
create TRAY_0_VOL_1 of size 15.756 TiB
Creating TRAY_0_VOL_1
Setting additional attributes for Volume TRAY_0_VOL_1.
create TRAY_0_VOL_2 of size 15.756 TiB
Creating TRAY_0_VOL_2
Setting additional attributes for Volume TRAY_0_VOL_2.
Setting the Storage Array cache block size to 32.
Setting the Storage Array media scan rate to enabled for every 30 days.
Enable ALUA.
Enable T10/PI host ports.
All done with 'Qarray1'
Done with Qarray1
Quantum DXi6900-S Installation Guide
44
Advertisement
Table of Contents
