Table of Contents
Advertisement
Installing the DXi6900-S System in the Rack
Figure 22: DXi6900-S Power Cabling
System Node (Rear)
EBOD (0 to 6)
RBOD (1 or 2)
Ethernet Cables
Do not connect any Ethernet cables at this time. (You will connect them in a later procedure.)
l
Fibre Channel Cables
Connect Fibre Channel cables to each Fibre Channel port (see Figure 23 below). If there is a port
l
cover on the port, remove it before connecting a cable.
See
Table 2
for DXi6900-S Fibre Channel configuration options.
l
Figure 23: DXi6900-S Fibre Channel Cabling
Quantum DXi6900-S Installation Guide
Primary
AC Source
Port 1
ID/Diag
Primary
AC Source
|O|O|
Port 1
Port 2
ID/
Diag
Primary
AC Source
1
2
Port 1
ID/Diag
|O|O|
Port 1
Port 2
ID/
Diag
3
Secondary
AC Source
Secondary
AC Source
Secondary
AC Source
33
Advertisement
Table of Contents
