Introduction - En-Vision America ScripTalk ST400 User Manual

INTRODUCTION

Thank you for your investment in the ScripTalk Printer Model ST400. The ST400 can print and program the
same 2in. x 4in. ScripTalk "talking labels" previously created with model 220-SN. ScripTalk labels can be placed
on any size or shape prescription container, and have an embedded RFID chip that holds all of the prescription
data printed on the visual portion of the label. This programmed data can be read out by a ScripTalk Station
reader, or the ScripTalk Mobile smartphone app (Android and iPhone).
The ST400 ScripTalk Printer is fully compatible with the existing VA Class 1 software system, and the latest
version of the VA Computerized Patient Record System (CPRS).
This operator's manual contains the basic information about the installation and specifications of the printer.
A total of 5 topics are covered herein, and they are organized as follows:
Section 1: Introduction
Section 2: Installation
Section 3: Using the Touch Screen
Section 4: Troubleshooting
Section 5: Specifications
It is recommended that you read carefully and become familiar with each section before installing and
maintaining the printer. Refer to the Table of Contents at the front of this manual to search for the relevant
information needed.
This section assists you in unpacking the printer from the shipping container. You will also be guided through a
familiarization tour of the main parts and controls.
The following information is provided herein:
• Features of the Printer
• Unpacking
• Parts Identification
1