Installation; Site Location; Media Identification - En-Vision America ScripTalk ST400 User Manual

INSTALLATION

This section helps you with installing ScripTalk Talking Label media (10KB) in the ST400, as well as
adjustment instructions.
The following information is provided:

• Site Location

• Media Identification

• Loading Labels
• Connections
Site Location
Consider the following when setting up the printer:
• Place the printer on a solid flat surface with adequate space. Make sure there is enough space above
the printer to provide clearance for the top cover to swing open.
• Place it away from hazardous materials or dusty environments.
• Place it within operational distance of the host computer, within interface cable specifications.
Media Identification
The ScripTalk Printer ST400 requires specific label stock that can only be purchased from En-Vision America.
If you need more labels, have your purchasing agent fax a PO to 309-452-3643 for the following:
00210-10K-0250
The back of a ScripTalk Label will look similar to the one below. Over time, some details have varied, but the
metallic "race track" antenna has always been a feature:
ScripTalk Labels, 10K, 250/roll
6