Using The Touch Screen; Gestures; Low Power Mode; Powering Off - En-Vision America ScripTalk ST400 User Manual

USING THE TOUCH SCREEN

The ST400's color LED touch screen provides easy access to nearly all of the information, settings, and features
of the printer. This section will cover only those aspects relevant to using the printer for creating ScripTalk labels.
WARNING: It is recommended not to change any settings that are not covered in this section.
The following information is provided:

• Gestures

• Low Power Mode

• Powering Off

• Passwords
• Network Configuration
Gestures
The printer's touch screen can be navigated with taps and swipes, much like a smartphone. Tapping is used
to do things such as select buttons and place the cursor in text input fields. Swiping is used to scroll lists of
options, either up and down, or right and left. When swiping to scroll, press firmly, and be sure to swipe passed
the edge of the touch screen. This will help avoid unintended tapping.
Low Power Mode
After three minutes of no printing and no interaction with the touch screen, the printer will enter a low power
mode. It will be necessary to tap either the Home button or touch screen once to bring it out of this low power
mode and perform other actions. You will notice the screen brighten slightly when this occurs.
Powering Off
To turn the printer off, press and hold the Home/Power button until you see the screen below. Tap the
checkmark button to confirm, or the 'X' to cancel.
11