15.4 Time interval settings
We can set the timer in both operation modes (working and standby mode). With one press on the
the
display shows the next status:
Clock »00« is blinking and with
press the
button again and minutes »00« start blinking.
Now, with the
or
press on the
button, the display shows the next status:
Clock »00« is blinking and with
press the
button again and minutes »00« start blinking.
Now, with the
and
Controller enables setting 2 daily turn on and off cycles. During setting, please ensure that the heating cycle is
not shorter than 6h. Set timer is valid after 24h after setting finished.
To delete the time interval settings, press the TIMER button and then the CLOCK button.
buttons we can set the hour of the start heating cycle clock, then
and
buttons set the minutes of the start heating cycle, example: 23:30. With another
and
buttons we can set the hour of the end heating cycle clock, then
buttons set the minutes of the end heating cycle clock, example: 06:00.
16
,
button