Table 7: Network Port LEDs on QSFP+ Ports on an EX4600 Switch (continued)
Color
State
Green
On steadily
Blinking
Amber
Blinking
Management Panel of an EX4600 Switch
Copyright © 2019, Juniper Networks, Inc.
The management panel of the EX4600 switch is located on the Field Replaceable Unit
(FRU) side of the switch, as shown in
management panel details.
Figure 7: EX4600 Switch, FRU Side with Fans Modules and Power Supplies Installed
1—
Management panel
2—Fan modules
Description
A link is established, but there is no link activity.
NOTE:
When configured for 10-Gigabit Ethernet, the LED is lit green
when at least one of the four 10-Gigabit Ethernet SFP+ breakout
links is established.
A link is established, and there is link activity.
NOTE:
When configured for 10-Gigabit Ethernet, the LED is lit green
when at least one of the four 10-Gigabit Ethernet SFP+ breakout
links is established.
All four LEDs blink to indicate the beacon function was enabled on
the port.
Figure 7 on page
3—
Power supply units
Chapter 1: Overview
27. See
Figure 8 on page 28
for
27