Table of Contents
Advertisement
Item
Description
1
Power On/Standby button and system power LED
2
GSI LED
3
Internal Health LED
4
UID button/LED (Drawer 2)
5
Power supply LED
6
System fan LED
7
7-segment display
42
Reference
Status
Green: On
Amber: Standby (auxiliary power present).
Off: Off
Amber: Enclosure requires a service check.
Check the I/O module, fan and power supply
LEDs, and AC power cables to the power
supplies. To view any GSI error codes on the
rear display, activate the associated drawer
UID button.
Off: Enclosure is functioning normally.
Green: System health is good.
Off: System is off.
Blue: UID LED is enabled from the UID button.
Blue solid: System is in disk drive Locate
mode or an enclosure firmware update is in
progress.
Off: UID LED is disabled.
Green: Power-on and power supply
functioning properly
Off: One or more of the following conditions
exists:
•
System powered off
•
AC power unavailable
•
Power supply failed
•
Power supply exceeded current limit
Green: Normal operation
Amber flashing: Fault
Off: Fan unseated from connector or failed.
For more information, see 7-segment display
status codes and actions.
Table Continued
Advertisement
Table of Contents
