HP HPE D6020 Installation Manual page 39

Item Description
1 Hard drive LEDs
Normal mode (UID LED is off)
Hard drive LEDs
Drive Locate mode (UID LED is solid)
2 UID button/LED
Status
Green: The drive is online, but it is not currently active.
Flashing irregularly green: The drive is active and operating
normally.
Flashing green (1 Hz): The drive is rebuilding, or it is part of
an array that is undergoing expansion, logical drive extension,
a stripe size migration, or RAID migration.
CAUTION: Do not remove the drive. Removing the
drive may terminate the current operation and cause
data loss.
Flashing amber/green: The drive is configured and indicating
a predictive failure. The drive may also be undergoing a
rebuild, expansion, extension, or migration.
Flashing amber (1 Hz): A predictive failure alert has been
received for this drive. Replace the drive as soon as possible.
Amber: A drive failure, link failure, or mismatched
configuration has occurred.
Off: The drive is offline, a spare, or not configured as part of
an array.
Green: The drive is selected by a management application
and operating normally.
Flashing amber (1 Hz): The drive is not selected and is
indicating a predictive failure.
Flashing amber/green: The drive has been selected by a
management application and is indicating a predictive failure.
Amber: The drive might or might not be selected and is
indicating drive failure, link failure, or mismatched
configuration.
Blue: The drive is in Locate mode/Safe to remove.
Flashing Blue: The drive is in Locate mode/Do not remove.
Off: The drive is not selected.
Blue: The drive is in Locate mode. The UID LED is enabled
from the UID button
Off: The UID LED is disabled.
Table Continued
39
Reference