End Of A Vnc Session; Disconnection - Viavi 4000 V2 Manual

Chapter 5 Power meter, VFL (Visual Fault Locator) & Talkset
Talkset and Datalink Functions

End of a VNC session

In order to end a VNC session, you can:
1 Return to the Connectivity page and click on
mended solution)
or
Deactivate the Optical Datalink function on either 4000 V2 Platform connected.
A short sound is emitted to indicate the disconnection is done, and the icon
Optical Datalink turns inactive.
2 Disconnect the fiber
NOTE
The VNC icon in the top banner of the screen lets you know at all times
whether you are in a VNC session or not.

Disconnection

When communication is over:
1 Deactivate the Talkset/Datalink function on one of the 4000 V2 Platform.
2 This deactivation can be done by either 4000 V2 Platform.Then, the fiber used
can be disconnected safely.
44 User Manual
Return to local
74000NG012 Rev. 004
screen. (Recom-