Safety Measures - Vitek VT-3414 Instruction Manual

BLENDER SET VT-3414
The blender is included into the blender set
and intended for whisking, mixing, chop-
ping and combined processing of liquid and
solid foods, as well as for making mashed
potatoes.
DESCRIPTION
1. Detachable blender attachment
2. Motor unit
3. ON button
4. Attachment installation place
5. Chopper geared lid
6. Chopper bowl
7. Chopping knife
8. Whisk attachment gear
9. Whisk attachment
10. Mashed potato attachment
ATTENTION!
For additional safety protection of the power
circuit, installing a residual current device
(RCD) with the nominal operation current not
exceeding 30 mA is recommended. To install
the RCD contact an expert.

SAFETY MEASURES

Before using the blender set, read this manual
carefully and keep it for further reference. Use
the blender set for its intended purpose only as
specified in this manual.
Mishandling of the appliance may lead to its
breakage and cause harm to its user or dam-
age his/her property.
• Before connecting the appliance to mains,
make sure that the voltage specified on the
appliance corresponds to your home mains
voltage.
• Do not use the appliance outdoors.
• Do not use the appliance near hot surfaces
(such as gas or electric stove, oven).
Make sure that the power cord does not
•
touch sharp edges of furniture and hot sur-
faces.
Do not touch the motor unit body, the power
•
cord and the plug with wet hands.
To avoid risk of electric shock or fire, do not
•
immerse the appliance body, the power cord
and the power plug into water or any other
liquids.
If the appliance is dropped into water:
•
do not touch the water;
–
unplug the appliance immediately, and
–
only after that you may take the appliance
out of water;
apply to an authorized service center for
–
testing or repairing the appliance.
• Before using the appliance for the first time,
thoroughly wash all the removable attach-
ments and containers that will contact food.
• Use only the attachments supplied with the
appliance.
• Before using the appliance, make sure that
the attachments are set and fixed properly.
It is not allowed to switch the appliance on
•
without attachments and foods for process-
ing.
Never leave the appliance connected to
•
mains unattended.
Unplug the appliance from mains before
•
assembling/disassembling,
changing attachments and after use.
Place the chopper bowl on a flat and stable
•
surface.
Put foods into the chopper bowl before the
•
appliance is switched on.
Refrigerate hot foods before placing them in
•
the chopper bowl.
Do not overfill the chopper bowl with foods
•
and watch the level of poured liquids.
If rotation of the chopping knife is hindered
•
during the operation of the chopper, unplug
the appliance and carefully remove foods
that prevent knife rotation.
• Remove foods and pour out liquids from the
chopper bowl only after complete stop of the
chopping knife.
• The cutting edges of the chopping knife and
of the blender attachment are very sharp
and can be dangerous. Handle these attach-
ments very carefully!
• Do not touch the rotating parts of the appli-
ance. Do not let hair or free hanging clothes
get into the rotation area of the blender
attachment knife or whisk.
To unplug the appliance, do not pull the
•
power cord, take the power cord plug and
disconnect it from the mains.
Do not place the chopper bowl into a micro-
•
wave oven.
Do not put the attachments and bowls in a
•
dishwashing machine.
For the safety of children, do not leave plas-
•
tic bags used as packaging unsupervised.
9
ENGLISH
cleaning,