Safety Measures - Vitek VT-1450 Manual Instruction

BLENDER VT-1450
The blender is intended for chopping and combined
processing of liquid and solid products.
DESCRIPTION
1. Detachable blender attachment
2. Motor unit
3. Mode «I» button
4. Mode «II» button
ATTENTION!
For additional protection it is reasonable to install a
residual current device (RCD) with nominal opera-
tion current not exceeding 30 mA. To install an RCD
contact a specialist.

SAFETY MEASURES

Before using the unit, read these instructions carefully
and keep them for future reference.
Use the unit for intended purposes only, as specified in
this manual.
Mishandling the unit can lead to its breakage and cause
harm to the user or damage to his/her property.
•
Before connecting the unit to the mains, make sure
that the voltage specified on the unit corresponds to
your home mains voltage.
•
Never leave the unit connected to the mains unat-
tended.
•
Always unplug the unit before changing the attach-
ments.
•
Before using the unit, make sure that the attachment
has been set properly.
•
Do not connect the motor unit to the mains if the
attachments are not installed.
•
It is not allowed to switch the unit on without attach-
ments and foodstuffs for processing.
•
Do not use the unit outdoors.
•
Use only the attachments supplied.
•
Before using the unit for the first time, thoroughly
wash all the removable attachments and containers
that will contact food.
•
The blender attachment's cutting edges are very
sharp and dangerous. Handle these attachments
very carefully!
ENGLISH
3