Safety Measures - Vitek VT-1452 ST Manual Instruction

BLENDER VT-1452 ST
The blender is intended for chopping, mixing
and beating products.
DESCRIPTION
Detachable blender attachment
1.
Attachment locks
2.
Motor unit
3.
Maximal speed button "TURBO"
4.
Minimal speed button « »
5.
Attachment rotation speed control knob
6.
Chopper bowl
7.
Chopping knife
8.
Geared lid
9.
Measuring cup
10.
Whisk for beating/mixing of liquid products
11.
Whisk gear
12.

SAFETY MEASURES

Read this instruction manual carefully before
using the unit and keep it for the whole opera-
tion period.
Use the unit for intended purposes only, as
specified in this manual.
Mishandling the unit can lead to its breakage
and cause harm to the user or damage to his/
her property.
• Before connecting the unit to the mains, make
sure that the voltage specified on the unit cor-
responds to your home mains voltage.
• The blender allows quick and effective oper-
ation, but continuous operation time should
not exceed 1 minute while using the blender
attachment and the whisk, and it should
not exceed 20-30 seconds while using the
chopper. Make at least a 2-3 minute break
between operation cycles.
• When using the blender attachment, cool
down hot foodstuffs, maximal food temper-
ature should not exceed +70°С.
• When using the mini-chopper, the tem-
perature of products should not exceed
+40°C.
• It is not allowed to switch the unit on without
attachments and products for processing.
• Do not use the unit outdoors.
• Do not place the chopper bowl into a micro-
wave oven.
• Use only the attachments supplied.
• Unplug the unit before changing attach-
ments.
VT-1452.indd 3
• Before using the unit for the first time, thor-
oughly wash all the detachable attachments
and containers that will contact food.
• Before using the unit, make sure that the
attachments are set properly.
•
Place the chopper bowl on a flat stable sur-
face.
• Products should be put into the chopper
bowl before the unit is switched on.
• Do not overfill the chopper bowl with prod-
ucts and watch the level of liquids.
•
The cutting edges of the chopping knives
and of the blender attachment are very
sharp and dangerous. Handle these attach-
ments very carefully!
• If rotation of the chopping knife is hindered
during the operation of the chopper, unplug
the unit and carefully remove products that
prevent blade rotation.
• Remove products and pour out liquids from
the chopper bowl only after complete stop
of the chopping knife.
•
Do not touch the rotating parts of the unit.
Do not let hair or free hanging clothes get
into the rotation area of the blender attach-
ment knife or whisk.
• Never leave the unit connected to the mains
unattended.
• Unplug the unit every time before cleaning
or when you are not using it.
• Unplug the unit by taking the power plug
directly. Do not pull the power cord and do
not twist it.
•
Do not put the motor unit, gears, attach-
ments or bowls in a dishwashing machine.
• Do not use the unit near hot surfaces (such
as gas or electric stove, oven).
• Provide that the power cord does not touch
sharp edges of furniture or hot surfaces.
• Do not touch the motor unit body, the power
cord or the power plug with wet hands.
• Do not use the unit if the power cord or the
power plug is damaged.
• For children safety reasons do not leave
polyethylene bags, used as a packaging,
unattended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger
of suffocation!
• Do not allow children under 8 years of age to
touch the body of the motor unit, the power
3
ENGLISH
14.09.2015 11:24:59