NEC Express5800/R120h-1M Manual page 50

(6) PCIe Devices Configuration Menu
When you select System Configuration > BIOS/Platform Configuration (RBSU) > PCI Device Configuration from
the System Utilities, the PCI Device Configuration menu appears.
For details about the additional options, see the table below.
Option
Advanced PCIe Configuration
(a) Advanced PCIe Configuration Menu
When you select System Configuration > BIOS/Platform Configuration (RBSU) > PCIe Device Configuration >
Advanced PCIe Configuration from the System Utilities, the Advanced PCIe Configuration menu appears.
For details about the additional options, see the table below.
Option
PCIe Bifurcation
Options
PCIe MCTP
Options
i. PCIe Bifurcation Options
When you select System Configuration > BIOS/Platform Configuration (RBSU) > PCIe Devices Configuration
> Advanced PCIe Configuration > PCIe Bifurcation Options from the System Utilities, the PCIe Bifurcation
Options menu appears.
For details about the additional options, see the table below.
Option
PCIe Slot XX [Auto]
Bifurcation Slot Bifurcated
ii. PCIe MCTP Options
When you select System Configuration > BIOS/Platform Configuration (RBSU) > PCIe Devices Configuration
> Advanced PCIe Configuration > PCIe MCTP Options from the System Utilities, the PCIe MCTP Options menu
appears.
For details about the additional options, see the table below.
Option
PCIe Slot XX MCTP
Broadcast Support
Parameter
-
Parameter
-
-
Parameter
If the device installed in the slot supports this capability, the "Slot Bifurcated" can
be selected.
When "Auto" is selected, the PCIe slot will train at the maximum width
supported by the slot and end point.
When "Slot Bifurcated" is selected, the PCIe slot will be bifurcated into two equal
width slots.
XX: 1/2/3... (XX appears as specific slot number by the processor or the riser
card configuration.)
Parameter
[Enabled] Use this option to control the PCIe Management Component Transport
Disabled Protocol (MCTP) Support for a given slot. This option can be used to disable
MCTP support to a given PCIe endpoint that may not properly support this
protocol. It is recommended that this option remain enabled for full system
functionality.
XX: 1/2/3... (XX appears as specific slot number by the processor or the riser
card configuration.)
Description
Description
Description
Description
- 50 -
-
-
-
[ ]: Default setting
[ ]: Default setting