NEC Express5800/R120h-1M Manual page 44

● Notes for using TPM in VMware ESXi
If your system has TPM kit (N8115-35) and OS is VMware ESXi with System ROM Version v 2.00 (02/02/2019) or later
and the, should be used "TPM 2.0" in TPM Mode.(*1).
PSOD (Purple Screen of Death) occasionally occurs when TPM Mode is set to "TPM 1.2".
(*1) The factory default setting is "TPM 2.0".
Check TPM Mode and change setting from the following menu.
Menu Location : System Utilities > System Configuration > RBSU > Server Security >
Trusted Platform Module Options
Indicating : Current TPM Type
Settings : TPM Mode Switch Operation
● Change of RAID monitoring and reporting method
If VMware ESXi uses N8103-189/190/191/192/193/194/195/196/201/237/238 RAID controller and N8103-239
SSD Adapter for OS Boot, the RAID monitoring report will be changed to snmp trap reporting.
For details, please check the following website.
NEC Support Portal
http://www.58support.nec.co.jp/global/download/N8103-239/WBEM_uninstall_en.pdf
● Cautions on using Linux OS
Use the device name of LOM or optional NIC which the OS automatically recognizes. When adding a unique udev rule,
do not change or fix the NIC device name based on the PCI address.
In addition, do not use the storage device name under /dev/disk/by-path/ that includes the PCI address.
If operation using a device name based on the PCI address is required, do not add/remove the card to/from the PCI slot,
or change the CPU configuration. If the PCI bus address information changes and the name of the PCI-connected device
is affected, you may not be able to access the network or storage, and the system may not boot normally.
- 44 -