NEC Express5800/R120h-1M Manual page 48

A) The additional options by firmware update
■ About changing the BIOS/Platform Configuration (RBSU) menu
Some options are added or changed by firmware update of this product.
The additional options are listed below.
(1) Server Availability Menu
When you select System Configuration > BIOS/Platform Configuration (RBSU) > System Options >
from the System Utilities, the
Availability
For details about the additional options, see the table below.
Option
IPMI Watchdog Timer
IPMI Watchdog Timer
Timeout
*1
IPMI Watchdog Timer
Action
*1
*1: an option usable with System ROM Version 2.54 or later.
(2) Memory Options Menu
When you select System Configuration > BIOS/Platform Configuration (RBSU) > Memory Options from the System
Utilities, the Memory Options menu appears.
For details about the additional options, see the table below.
Option
Memory Controller
Interleaving
Opportunistic Self-
Refresh
(3) Intel UPI Options Menu
When you select System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options
> Intel UPI Options from the System Utilities, the Intel UPI Options menu appears.
For details about the additional options, see the table below.
Option
Direct To UPI (D2K)
Server Availability
Parameter
[Disabled] Use this option to enable a Boot Time (POST) IPMI compliant
*1
Enabled Watchdog Timer (WDT) that is disabled when an IPMI command is
issued to the system by the user and will not automatically be disabled.
10 Minute Use this option to set the wait timer before performing the desired
15 Minute timeout action on the server in the event of a server lockup.
20 Minute
[30 Minute]
[Power Cycle] Use this option to set the timeout action upon expiration of the watchdog
Power Down
timer due to a server lockup.
Warm Boot
Parameter
[Auto] Use this option to control the Memory Controller Interleaving option. When set
Disabled to Auto, the system will automatically enable or disable memory controller
interleaving based on the configuration of the system. When set to disabled, the
user may force disable memory controller interleaving. In certain memory
configurations, setting this option to disabled has showed a performance benefit
across all memory in the system. It is recommended to leave this option to set
to Auto.
[Disabled] When "Enabled" is selected, self-refresh of memory is performed when the main
Enabled memory is in the idle state.
When "Disabled" is selected, regular-refresh of memory is performed.
Parameter
[Auto] When "Enabled" is selected, Latency of the last level cache is reduced.
Enabled Please don't change this setting unless it's designated.
Disabled This options appears on only dual processor configuration.
menu appears.
Description
Description
Description
- 48 -
Server
[ ]: Default setting
[ ]: Default setting
[ ]: Default setting