This manual will first list the features of the UHF-3 and then will take you step by step to show you how to operate your new system. After reading the receiver instructions, turn to the section of the booklet that covers the type of transmitter used with your new system.
If the volume control is set too high, you may overload your mixer or amp. The UHF-3 receiver is equipped with a 5 segment LED AF LEVEL DISPLAY (14). Occasional flickering of the top AF Peak LED indicator on loud inputs to the transmitter is normal.
Page 4
The microphone is now ready to use. The A and/or B DIVERSITY LED INDICATORS (13) on the UHF-3 receiver should now be lit, indicating a received signal from the transmitter. When ready to speak, slide the audio MUTE SWITCH (19) to the ON position.
INSTRUMENT mode. Levels should be adjusted with the volume control of your instrument.) The UHF-3 receiver is equipped with a 5 segment LED AF LEVEL DISPLAY (14). Occasional flickering of the top AF Peak LED indicator on loud inputs to the transmitter is normal.
(International) For service, please contact the Nady distributor in your country through the dealer from whom you purchased this product. Nady Wireless Systems are type accepted under FCC rules parts 90, 74 and 15. The device complies with RSS-210 of Industry & Science Canada. Operation is subject to...
Need help?
Do you have a question about the DigiTRU Diversity UHF-3 and is the answer not in the manual?
Questions and answers