Nady Systems UWS-1K Owner's Manual
  1. Manuals
  2. Brands
  3. Nady Systems Manuals
  4. Microphone system
  5. UWS-1K Series
  6. Owner's manual

Nady Systems UWS-1K Owner's Manual

1000 channels pll frequency synthesized uhf wireless microphone and instrument system
Hide thumbs Also See for UWS-1K:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
UW S - 1 K
1000 Channels PLL Frequency Synthesized
UHF Wireless Microphone and Instrument System

SERVICE INFORMATION

(U.S.) If you are experiencing operation problem with your system, check out the support
page on the Nady website: www.nady.com for help and for contacting the Nady Service
Department. Should your wireless System require service, you must contact the Nady Service
Department at (510) 652-2411 for a Return Authorization (R/A) Number and a service quote
(if out of warranty). Make sure the R/A Number is clearly marked on the outside of the pack-
age. Cashier's check or money is enclosed (If not prepaid with credit card), and ship the unit
prepaid to: Nady System Inc., Service Department, 6701 Shellmound Street, Emeryville, CA
94608. Include a brief description of the problem you are experiencing, for service of a unit
under warranty follow the instruction of your Warranty Card regarding Warranty Service.
(International) For service, please contact the NADY distributors in your country through the
dealer from whom you purchase this product.
DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF, AS THAT WILL VOID YOUR
WARRANTY.
NADY SYSTEMS, INC.
6701 Shellmound Street • Emeryville, CA 94608
OWNER'S MAN UAL
Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UWS-1K and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Nady Systems UWS-1K

Summary of Contents for Nady Systems UWS-1K

  • Page 1: Service Information

    DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF, AS THAT WILL VOID YOUR WARRANTY. NADY SYSTEMS, INC. 6701 Shellmound Street • Emeryville, CA 94608 OWNER’S MAN UAL Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com...

  • Page 2: Table Of Contents

    ACCESSORIES SYSTEM OPERATION ........................4 UWS-1K Receiver Buttons Function ..................4 Part Number Description Selecting the UWS-1K Receiver Group, Channel, and SQL Setting ........4 RMK-1K Single receiver rack mount kit UH/UB-1K Transmitters Buttons Function ................4 RMK-1KX2 Dual (side-by-side) receiver rack mount kit Selecting the UH/UB-1K Transmitters Group and Channel Setting ........5...

  • Page 3: Introduction

    (2 complete receiver sections with optimum audio selected) Sensitivity ......................... -107dBm, normal This manual will first explain the benefits of the UWS-1K and then will take you step by step on how Selectivity ....................60dB, normal +/-75kHz offset to operate your new system. Each section will give you detailed information. Also, included in this Image Rejection ......................-70dB, minimum...

  • Page 4: System Operation

    (not too high and not too low). This provides the optimum signal-to-noise for The UP-DOWN Rocker button (20) works only while setting the menu. At Power OFF the UWS-1K the entire system.

  • Page 5: Selecting The Uh/Ub-1K Transmitters Group And Channel Setting

    Unidirectional mics are more resistant to ing Power ON, the Transfer Button (18) on the UWS-1K receiver must be pressed once while the feedback. However, they pick up sound sources best that are directly in front of the mic. Also mics MAIN MENU is being displayed.

  • Page 6: Adjusting The Mute (Rf Squelch)

    UH-1K or UB-1K transmitter included with your system. (Please note: 31. Input level control Only one transmitter can be used with one UWS-1K receiver. It is not possible too use two transmit- ters on the same frequency and mix the output of these transmitters into one wireless receiver.) 32.

  • Page 7: Instrument Use

    UB-1K’s Power/Mute Button (32) to unmute. To mute, press the POWER button again. 1. Rack ears (optional) 11. Group/Channel Adjust the volume of the receiver as per section 12 (UWS-1K Receiver: Connecting Audio Output) 2. Join pieces (optional) 12. RF level meter above.

  • Page 8: Setting Up The Transmitter

    (audio mute) mode and the previous program channel remains unchanged. 25. IR LED indicator After 20 seconds the IR LED (on both the UWS-1K and UH-1K) will turn off. 26. Mute LED 27. Battery level LEDs (Note: The IR link is infrared light and thus works best when this data transfer is accomplished in 28.

Table of Contents