Maintenance And Overhaul - BorMann PRO BMF5000 Manual

EN
The declared total value of vibration has been measured through a standard measurement method and may be used to compare different tools. The declared
total value of vibration may be used for the purpose of preliminary evaluation of exposure. Attention! The actual vibration while operating the tool may vary
from the declared value, depending on the use of the tool. Attention! It is required to specify the safety measures to protect the operator, which are based
upon the evaluation of exposure under actual conditions of work (including all the stages of the working cycle, e.g. the periods when the tool is off or is idling
and the periods of active operation).

Maintenance and Overhaul

ATTENTION! Before any adjustment, technical service or maintenance operations unplug the tool. Once the operations have been finished, the technical con-
ditions of the tool must be assessed by means of external evaluation and inspection of the following elements: body and handle, conductor with a plug and
deflection, functioning of the electric switch, patency of ventilation slots, sparking of brushes, noise level of functioning of bearings and gears, start-up and
smoothness of operation. During the guarantee period, the user cannot dismantle the electric tools or change any sub-assemblies or elements, since it will
cancel any guarantee rights. All irregularities detected at overhaul or during functioning of the tools are a signal to have the tool repaired at a service shop. Once
the functioning has been concluded, the casing, ventilation slots, switches, additional handle and protections must be cleansed with a stream of air (at a pres-
sure not exceeding 0.3 MPa), with a brush or a cloth without any chemical substances or cleaning liquids. Tools and handles must be cleansed with a clean cloth.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the prod-
ucts. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be included in
the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or
for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by tech-
nicians of the authorized service department of the manufacturer.
5
WWW.BORMANNTOOLS.COM