Remounting - Flowserve Limitorque Accutronix MX Maintenance & Spare Parts Manual

Mechanical Assemblies
STEP 3
Pull the handwheel adapter assembly (#12) out of the
actuator housing.
STEP 4 (MX-10 ONLY)
Lift out wave spring (#1-10) from actuator housing.

4.14.2 Remounting

STEP 5 (MX-10 ONLY)
Insert the wave spring (#1-10) onto the shoulder of the
actuator housing.
4-56 Accutronix MX Maintenance & Spare Parts Manual
Flow Control Division
Limitorque Actuation Systems
3
4
5
1-10
130-12000 Revision B • November 2002
12
1-10