Flowserve Limitorque Accutronix MX Maintenance & Spare Parts Manual page 58

Flow Control Division
Limitorque Actuation Systems
Mechanical Assemblies
4.8.1 Removal
FIRST REMOVE
1. Remove actuator from mounting adapter.
STEP 1
a
WARNING
Potential to operate while dangerous mechanical parts
1
are exposed during subassembly removal. To prevent injury, turn off all
power sources to actuator before removing torque base assembly. Power
sources may include: main power or control power.
Remove the four screws (#10-1) and pull the torque base
assembly off the actuator.
4.8.2 Remounting
STEP 2
Secure the torque base with the four screws (#10-1).
2
4-36 Accutronix MX Maintenance & Spare Parts Manual 130-12000 Revision B • November 2002