Summary of Contents for Dakota Digital VHX-68D-STD
Page 1
VHX-68D-STD Dakota Digital VHX Instrument Installation For 1968-70 Dodge/Plymouth B-Body Non-Rallye Your new VHX-68D-STD kit includes: VHX Display Universal Sender Pack (4) ½” Oval Head Screws Installation Manuals (3) ½” Pan Head Screws Switch Assembly 36” CAT5 Cable Control Box Installation 1.
Page 2
2. Remove the factory gauge cluster from the dash; also remove the gauge cluster bezel from the gauge cluster. Retain all factory hardware for reassembly. 3. Mount the factory gauge bezel to the VHX system by reusing the nine (9) screws that held it to the factory gauge cluster.
Page 3
5. Mount the VHX system to the dash using the two (2) factory screws from disassembly for the upper mounts and the provided four (4) oval head screws for the lower mounts. 6. Re-install the lower dash pad using the three (3) provided pan head screws. Then mount the switch panel to the dash using the factory hardware from disassembly.
Page 4
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Manual # 650663...