Table of Contents
Advertisement
Testing a Patient Sample
1. RFID card placement
Take the provided RFID card out
of the test box and place it on
the RFID card well on top of the
Analyser. The RFID and test
tops are colour coded – confirm
that the colours are the same on
the test tops and RFID card.
4. Select operator screen
All saved operators will be
shown in the drop-down list.
Tap
and
operator or tap
new operator (see. 3.4 on p. 20
for details).
Tap
to confirm the input.
Note: when testing for the first
time, you will be prompted to
create an operator.
Tap
to open the operator
Operator menu
menu (see
page 20 for details).
This screen only appears when
1
operator input is enabled (page
20)
PI MCI-EUR Rev 05
2. Main menu
Tap
to start a measurement.
The MyCare Insite automatically
reads the RFID card and the Test
Menu appears.
5. Input menu
1
Tap the desired input field (e.g.
"Name"), the Touch Screen
select
an
keyboard appears. Enter the
information and confirm with
to create a
"Done".
on
in the main menu
5.1 Input menu Hematocrit
When
a hematocrit value can be set
manually.
automatically
hematocrit when set to "Auto".
2
with hematocrit enabled
3.Test screen
The MyCare Insite displays the test
name
and
number
remaining on the RFID card. Ensure
the test name is the test being run.
Tap
to proceed.
Tap
to return to the main menu.
2
Hematocrit
is set to "Manual"
The
software
calculate
This screen only appears for tests
of
tests
will
the
.
28 / 50
Advertisement
Table of Contents
