The Touch Screen; The Mycare Insite Launch Screen - Saladax MyCare Insite User Manual

Make sure all users and patients in contact with the equipment and/or system are free from
direct or indirect electrostatic energy before using it. A humid room can help reduce this
problem.
4. Electromagnetic interference with any radio wave receiver such as radio or television:
If the equipment and/or system interferes with any radio wave receiver, locate the
equipment and/or system as far as possible from the radio wave receiver.
If the above suggested remedial actions do not solve the problem, consult your Official Saladax
Distributor for additional suggestions.

The Touch Screen

The MyCare Insite Analyser is operated with a Touch Screen.
Insure the Analyser is plugged in. Connect the Touch Screen to the USB port (see page 9) of the
Analyser and then turn on the Touch Screen.
An independent Touch Screen manual is included with the Touch Screen. It describes in detail the use
of the Touch Screen, how to manage settings and establish a Bluetooth or USB connection between
the Analyser and the Touch Screen.

The MyCare Insite Launch Screen

Launch Screen
PI MCI-EUR Rev 05
The Launch Screen is shown when the Touch
Screen is not connected to the Analyser or by
pressing the Touch Screen home button.
Browser
Tap to open the Android web browser.
Touch the MyCare Insite Logo to start the MyCare
Insite app.
Settings
Touch to open the Android setting menu.
Note: If the standard Android home screen
appears instead, switch the Touch Screen off,
and back on, select "MyCare INSITE Launcher"
and confirm by tapping always.
16 / 50