Configuring The Mycare Insite; Setting Normal Values And Limits - Saladax MyCare Insite User Manual

Configuring the MyCare Insite

You can configure your MyCare Insite laboratory photometer according to your needs before using it.
To access the settings menu follow these steps:
1. Start-up menu
Tap to open the Settings
menu.
The following descriptions are examples. The configuration of the MyCare Insite may vary
depending on the tests used.
Note: The Normal values/Range, units, and sample types for a test can only be displayed if the
RFID card for the test has been placed on the Analyser and read.

Setting Normal Values and Limits

1. Settings menu
Normal Values
Tap to open the
Normal values / limits menu.
PI MCI-EUR Rev 05
2. Settings menu
Tap the setting you want to
configure. Swipe down to view
all available options.
2. Normal values / limits menu, e.g. CLZ
To change a limit, tap the value and
change it using the Touch Screen
keyboard that appears.
To change the test for which the
normal values are displayed, tap
and select a test from the
drop-down menu.
19 / 50