Environmental Disposal - Nakayama PRO NP1070 Manual

EN
CLEANING
• Clean the equipment from the outside.
• Flush with clean water.
• Use brush and detergent to remove stubborn impurities.
• Immerse the pump into a container with clean water, open and run it for a while, then flush it in the pump.
STORAGE
• If there is a risk of frost, remove equipment and accessories and clean and store it in a place protected from frost.
DESCRIPTION OF THE EQUIPMENT AND INTENDED USE
This tool is an electric pump. It is used for pumping water and in other similar water applications, mainly in basements.
When installed at the bottom of the shaft, the pump prevents seeping in the basement.
The electric pump can also be used for water supply and drainage, for example in the household, agriculture, gardening, pipelines and other suitable applications.

ENVIRONMENTAL DISPOSAL

In order to avoid damages on transportation, the tool has to be delivered in solid packaging. Packaging as well as the unit and accessories are made of
recyclable materials and can be disposed accordingly. The tool's plastics components are marked according to their material, which makes it possible to remove
environmental friendly and differentiated because of available collection facilities.
Only for EU countries
Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with
national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible
recycling facility.
4
Before using the pump again, clean it first to prevent any possible
dirt residue from building up which could negatively affect the
equipment's operation.
Attention!
Risk of equipment damage: Frost will destroy electrical appliances
and accessories, because they always contain water.
Attention!
WWW.NIKOLAOUTOOLS.GR