Applicable Devices And Device Configuration; Applicable Devices - Omron CJ Series Connection Manual

Ethernet/ip vision system
Hide thumbs Also See for CJ Series:
Table of Contents

Advertisement

5. Applicable Devices and Device Configuration

5.1. Applicable Devices

The applicable devices are as follows:
Manufac
turer
CJ2 CPU Unit
OMRON
EtherNet/IP Unit
OMRON
OMRON
FZ5 Sensor Controller
0.3 Megapixel Digital Camera
OMRON
0.3 Megapixel Small Digital Camera
0.3 Megapixel Small Digital Pen-Shaped Camera
0.3 Megapixel High-Speed Camera
2 Megapixel Digital Camera
5 Megapixel Digital Camera
Intelligent Camera
Intelligent Compact Camera
Precautions for Correct Use
As applicable devices above, the devices with the models and versions listed in Section 5.2.
are actually used in this document to describe the procedure for connecting devices and
checking the connection.
You cannot use devices with versions lower than the versions listed in Section 5.2.
To use the above devices with versions not listed in Section 5.2 or versions higher than those
listed in Section 5.2, check the differences in the specifications by referring to the manuals
before operating the devices.
Additional Information
This document describes the procedure to establish the network connection. Except for the
connection procedure, it does not provide information on operation, installation or wiring
method. It also does not describe the functionality or operation of the devices. Refer to the
manuals or contact your OMRON representative.
5.Applicable Devices and Device Configuration
Name
LCD-integrated Controller
Box-type Controller
Model
CJ2[]-CPU[][]
CJ1W-EIP21
CJ2H-CPU6[]-EIP
CJ2M-CPU3[]
FZ5-60[]/60[]-10
FZ5-110[]/110[]-10
FZ5-L35[]/L35[]-10
FZ-SC/S
FZ-SFC/SF
FZ-SPC/SP
FZ-SHC/SH
FZ-SC2M/S2M
FZ-SC5M2/S5M2
FZ-SLC100
FZ-SQ010F/SQ050F
FZ-SQ100F/SQ100N
5

Advertisement

Table of Contents
loading

Table of Contents