Connect Accessory (With Wireless Connection) - Jura E6 Instructions For Use Manual

Connect accessory (with
wireless connection)
T Remove the protective cover from the fine foam frother.
T Connect the milk pipe to the fine foam frother.
T Connect the other end of the milk pipe to a milk container
or a milk cooler.
You have the option of connecting your E6 wirelessly to a compat-
ible accessory (e.g. the Cool Control milk cooler). To do this, the
receiver of the Cool Control or the JURA Smart Connect must be
plugged into the service socket.
A frequency band of 2.4 GHz is used for this wireless connection. In
this case, the maximum transmission power is below 1 mW.
E The Smart Connect can be protected against unauthorised
access using a PIN. Activate the PIN function via J.O.E.
your JURA app. You will find more information at
jura.com/smartconnect.
E Please note that you can only connect either the accessory or
J.O.E. to the coffee machine via Smart Connect and not both
®
at the same time.
Precondition: The start screen is displayed.
T Position the accessory near the coffee machine (a maximum
of 0.5 m away).
T Switch on the accessory and the coffee machine.
T Press the reset button of the Smart Connect (e.g. with a
paper clip).
T Then (within 30 sec.) press and hold the reset button of the
accessory until the LED lights up to indicate the successful
connection.
1 Preparing and using for the first time
–
®
13