‘Machine is rinsing’, water flows out of the coffee spout. The operation stops automatically. The start screen is displayed. After each milk preparation, the JURA prompts you to perform a milk system rinse. Precondition: ‘Rinse the milk system’ is displayed.
Page 3
If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. Use only original JURA maintenance products. E JURA milk system cleaner is available from specialised dealers. Precondition: The start screen is displayed. T Press the ‘...
T Rinse all the parts under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in a solution of 250 ml cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly.
Changing the filter E Once the filter cartridge stops working (depending on the water hardness setting), the JURA will prompt you to change the filter. E CLARIS Smart filter cartridges are available from specialised dealers.
T Turn the switch to the ° position. The start screen is displayed. Descaling the machine The JURA builds up deposits of limescale over time and automati- cally prompts you to descale it when necessary. The degree of calci- fication depends on the hardness of your water.
Page 7
‘Agent in tank’ T Remove and empty the water tank. T Completely dissolve the contents of one blister (3 JURA des- caling tablets) in a receptacle holding 500 ml of lukewarm water. This may take several minutes.
Page 8
E6/E60 – Quick Reference Guide T Place a receptacle under the fine foam frother. T Turn the switch to the x position. ‘Machine is being descaled’ appears and water flows out of the fine foam frother repeatedly. The operation is interrupted, ‘Switch...