Connecting Milk; Connect Accessory (With Wireless Connection) - Jura ENA 8 Instructions For Use Manual

T Insert the filter cartridge with its extension
into the water tank.
click!
T Fill the water tank with fresh, cold water and
reinsert the tank.
E The machine automatically detects that you
have just inserted the filter cartridge.
'Saved'
'Filter is being rinsed', the filter is rinsed.
Water flows directly into the drip tray.
E If the
'Empty drip tray'
empty the drip tray and put it back into the
machine.
'System is filling'
'Machine is rinsing'
The rinse stops automatically. The start
screen is displayed. Your ENA is ready for
use.

Connecting milk

Your ENA creates fine, creamy, feather-light milk
foam with a perfect consistency. The most
important requirement for frothing milk is a milk
temperature of 4–8 °C. We would therefore
recommend using a milk cooler or a milk
container.
click!
message appears,
1 Preparing and using for the first time
T Remove the protective cover from the dual
spout.
T Connect the milk pipe to the dual spout.
T Connect the other end of the milk pipe to a
milk container or a milk cooler.
Connect accessory (with wireless
connection)
You have the option of connecting your ENA
wirelessly to a compatible accessory (e.g. the Cool
Control milk cooler). To do this, the receiver of
the Cool Control or the JURA Smart Connect must
be plugged into the service socket.
E The Smart Connect can be protected against
unauthorised access using a PIN. Activate
the PIN function via J.O.E.
You will find more information at
www.jura.com/smartconnect.
E Please note that you can only connect
either the accessory or J.O.E.
machine via Smart Connect and not both
at the same time.
Precondition: The start screen is displayed.
T Touch ' P '.
T Touch the 'Machine settings' symbol
de
en
fr
it
nl
es
– your JURA app.
®
pt
® to the coffee
ru
f
.
43