Jura Ena 5 Instructions For Use Manual
  1. Manuals
  2. Brands
  3. Jura Manuals
  4. Coffee Maker
  5. Impressa ENA5
  6. Instructions for use manual
Jura Ena 5 Instructions For Use Manual

Jura Ena 5 Instructions For Use Manual

Hide thumbs Also See for Ena 5:
Table of Contents

Advertisement

Quick Links

Instructions for Use

The 'ENA 5 Instructions for Use' has been awarded the
seal of approval by the independent German Technical
Inspection Agency, TÜV SÜD, due to its easy-to-understand
style, its thoroughness and coverage of safety aspects.
en
it
en
en
it

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ena 5 and is the answer not in the manual?

Questions and answers

Related Manuals for Jura Ena 5

Summary of Contents for Jura Ena 5

  • Page 1: Instructions For Use

    Instructions for Use The ‘ENA 5 Instructions for Use’ has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.

  • Page 2: Important Safeguards

    ENA 5 IMPORTANT SAFEGUARDS These safeguards apply for machines with UL safety test (see rating plate and chapter 8, ‘Technical data’). Follow the basic safety When using electrical appliances, basic safety precautions should precautions always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following: Read all instructions.
  • Page 3 ENA 5 Special cord set instructions a. A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a long cord. Your ENA has a 3-pin grounded plug. b. Longer extension cords are available and may be used if care is exercised in their use.
  • Page 4 ENA 5 NEVER DO Never fill instant coffee, chocolate mix etc. into the grinder or (or you will void your ground coffee funnel (grinder by-pass). It will damage the warranty protection): functioning of the brewing chamber. Never fill sugar coated coffee beans into the bean hopper. In case of doubt, call your dealer.

  • Page 5: Ena

    ENA 5...

  • Page 6: Table Of Contents

    ENA 5 Your ENA 5 IMPORTANT SAFEGUARDS Control elements Proper use For your safety Welcome to the world of JURA JURA on the Internet .............................11 Knowledge Builder ..............................11 Connector System ..............................11 © 3-colour plain text display ...........................12 Preparing and using for the first time Setting up................................12...
  • Page 7 ENA 5 Rinsing the Professional Cappuccino Frother ....................26 Cleaning the Professional Cappuccino Frother ....................27 Dismantling and rinsing the Professional Cappuccino Frother ..............27 Rinsing the Easy Cappuccino Frother ......................27 Cleaning the Easy Cappuccino Frother ......................28 Dismantling and rinsing the Easy Cappuccino Frother ................29 Dismantling and rinsing the 2-stage frothing nozzle ...................29...

  • Page 8: Control Elements

    ENA 5 Control elements Figure: ENA 5 Blossom White Water tank Bean container cover Powder chute for pre-ground coffee Switch for hot water and steam Coffee grounds container preparation Drip tray Connector System for removable © Cup platform nozzles Easy Cappuccino Frother...
  • Page 9 ENA 5 Figure: Open cover On/off button Display Grinding wheel Professional Cappuccino Frother Cover Easy Cappuccino Frother P button 2-stage frothing nozzle Maintenance button Hot water nozzle Rotary Switch The following nozzles are available from stockists and can be fitted to the Connector System ©...

  • Page 10: Proper Use

    ENA 5 Proper use There is a risk of scalds and burns from the spouts or the nozzle: The machine has been designed and built for Place the machine out of the reach of domestic use. It should only be used to prepare children.

  • Page 11: Welcome To The World Of Jura

    ENA 5 Connector System People, including children, who © do not have the physical, sensory or mental The Connector System permits the use of four © capabilities to use the machine safely or different nozzles: are inexperienced or lack knowledge in how...

  • Page 12: 3-Colour Plain Text Display

    ENA 5 Hot water nozzle Remove the water tank and rinse with cold water. Fill the water tank with cold, fresh water and replace the tank. Filling the bean container CAUTION Coffee beans which have been treated with 3-colour plain text display additives (e.g.

  • Page 13: Using And Activating Filter

    ENA 5 Using and activating filter Turn the Rotary Switch until LANGUAGE is displayed. Your ENA no longer requires descaling if you use ENGLISH CLARIS filter cartridges. E Perform the ‘Insert filter’ operation without interruptions. This will ensure optimum function of your ENA.

  • Page 14: Determining And Adjusting The Water Hardness

    ENA 5 Example: Changing the water hardness from Press the Rotary Switch. OPEN TAP 16°dH 25°dH Turn the switch to position Precondition: appears on the display. READY , water is dis- Open the cover behind the Rotary Switch. FILTER RINSING charged from the nozzle.

  • Page 15: Switching On The Machine

    ENA 5 Switching on the machine If the fineness of grind setting is too fine, the coffee only drips from the coffee spout. When the ENA is switched on, a prompt to perform a rinse operation automatically appears. Press the on/off button to switch the ENA on.

  • Page 16: Preparation

    ENA 5 2 Preparation Pre-ground coffee You can also use a second coffee blend in the 1 coffee at the touch of a button powder chute for pre-ground coffee. Precondition: appears on the display. READY Turn the coffee spout to the 1 cup position.

  • Page 17: One-Off Setting Before And During Preparation

    ENA 5 , the pre-set amount of water flows During grinding the coffee strength 1 CUP into the cup, preparation stops automati- is displayed. STRONG cally. , the pre-set amount of water flows 1 CUP into the cup, preparation stops automati- READY cally.

  • Page 18: Cappuccino With The Easy Cappuccino Frother

    ENA 5 Place a cup under the nozzle. Remove the protective cover from the Set the selector lever of the nozzle to the Easy Cappuccino Frother. milk foam position. Connect the milk pipe to the nozzle. Insert the other end of the milk pipe into a milk carton or connect it to a milk container.

  • Page 19: Cappuccino With The 2-Stage Frothing Nozzle

    ENA 5 Cappuccino with the 2-stage frothing nozzle regularly (refer to Chapter 4 ‘Maintenance – Precondition: appears on the display Dismantling and rinsing the 2-stage READY and the coffee spout is set at the 1 cup position. frothing nozzle’). Push the 2-stage frothing nozzle to the lower position.

  • Page 20: Heating Milk With The 2-Stage Frothing Nozzle

    ENA 5 Heating milk with the 2-stage frothing Hot water nozzle Precondition: appears on the display. E To prepare hot water, attach either the hot READY Push the 2-stage frothing nozzle to the top water nozzle or the 2-stage frothing nozzle position.

  • Page 21: Energy-Saving Mode

    ENA 5 Precondition: appears on the display. Before coffee or hot water is prepared, the READY Open the cover behind the Rotary Switch. machine heats up. Press the P button until appears. RINSE Example: Changing the energy-saving mode from Turn the Rotary Switch until PRODUCT displayed.

  • Page 22: Units Of Water

    ENA 5 Example: Changing the language from Turn the Rotary Switch until 2 HRS displayed. ENGLISH FRANCAIS Press the Rotary Switch to confirm the Precondition: appears on the display. READY setting. Open the cover behind the Rotary Switch. Press the P button until , the automatic switch-off time is then appears.

  • Page 23: Rinsing The Machine - Manually

    ENA 5 Rinse the nozzle regularly if it is used to warm E After two months the filter capacity is or froth milk. reached. The elapsed time can be checked with the date plate on the cartridge holder. E If the CLARIS filter cartridge is not activated, Rinsing the machine –...

  • Page 24: Changing The Filter - Manually

    ENA 5 Precondition: Rinsing of the filter stops automatically, is displayed. CLEAN READY Open the cover behind the Rotary Switch. CLOSE TAP Turn the switch to position Press the maintenance button. HEATING EMPTY TRAY Empty the coffee grounds container and READY drip tray and replace.

  • Page 25: Cleaning The Machine - Manually

    ENA 5 Turn the coffee spout to the 1 cup or 2 cup CAUTION position. Risk of damage to the machine if the descaling operation is interrupted. Cleaning the machine – manually Do not interrupt the descaling operation. The ‘Clean machine’ operation can be manually CAUTION initiated.

  • Page 26: Descaling The Machine - Manually

    ENA 5 Place a receptacle (500 ml min.) under the Turn the Rotary Switch until DE-SCALE the Connector System is displayed. © Turn the switch to position Press the Rotary Switch. , water flows out of the DE-SCALING EMPTY TRAY Connector System several times.

  • Page 27: Cleaning The Professional Cappuccino Frother

    ENA 5 Cleaning the Professional Cappuccino Frother Rinse the receptacle thoroughly, fill with To ensure that the Professional Cappuccino 250 ml of fresh water and immerse the milk Frother works perfectly, you should clean it daily pipe in the water.

  • Page 28: Cleaning The Easy Cappuccino Frother

    ENA 5 The ENA will not prompt you to rinse the Remove the milk pipe from the milk carton Easy Cappuccino Frother. or milk container. Pour 250 ml of fresh water into a receptacle Remove the milk pipe from the milk carton and add one capful (max.

  • Page 29: Dismantling And Rinsing The Easy Cappuccino Frother

    ENA 5 Dismantling and rinsing the Rinse all three nozzle parts thoroughly Easy Cappuccino Frother under running water. Carefully remove the Easy Cappuccino Reassemble the nozzle and attach it to the Frother from the Connector System Connector System © ©...

  • Page 30: Display Messages

    ENA 5 5 Display messages Message Cause/Result Action The water tank is empty. Fill the water tank (refer to FILL WATER TANK You cannot prepare any coffee Chapter 1 ‘Preparing and using for specialities, hot water or steam. the first time – Filling the water tank’).

  • Page 31: Troubleshooting

    ENA 5 6 Troubleshooting Problem Cause/Result Action Grinder is making a very There are foreign objects Contact customer support in your loud noise. in the grinder. country. Contact information is available on the company website at www.jura.com. The nozzle does not produce...

  • Page 32: Transport And Environmentally Neutral Disposal

    ENA 5 7 Transport and environmentally 8 Technical data neutral disposal Voltage 230 V AC, 50 Hz Transport / Emptying the system 120 V AC, 60 Hz Keep the packaging of your ENA. It should be 220 – 240 V AC, used to protect the machine during transpor- tation.
  • Page 33 ENA 5 Disposal Index Environmentally neutral disposal 32 2-stage frothing nozzle 9 Drip tray 8 Dismantling and rinsing 29 3-colour plain text display 12 Easy Cappuccino Frother 8 Cleaning 28 Adjusting Dismantling and rinsing 29 Energy-saving mode 21 Rinsing 27...
  • Page 34 Safety For your safety 10 The illustrations used in the ENA 5 Instructions Settings for Use show the ENA 5 Blossom White model. Default, in programming mode 20 Your ENA could incorporate minor changes. One-off setting, before and during preparation 17...

Table of Contents