‘Rinse the coffee system’ button to start the rinse operation. The operation stops automatically. Rinsing the fine foam After each milk preparation, the E6 prompts you to perform a milk frother system rinse. Precondition: ‘Rinse the milk system’ is displayed. T Place a receptacle under the fine foam frother.
E6/E60 – Quick Reference Guide Precondition: The start screen is displayed. T Press the ‘ Pc ’ button. T Press the ‘Clean the milk system’ button. T Press the ‘Start’ button. T Press the ‘Next’ button. ‘Milk system cleaner’ T Remove the milk pipe from the milk container or milk cooler.
T Re-fit the fine foam frother on the milk system. Inserting/changing the Your E6 no longer has to be descaled if you are using the CLARIS filter Smart filter cartridge. E Once the filter cartridge stops working (depending on the water hardness setting), the E6 will prompt you to change the filter.
E6/E60 – Quick Reference Guide Cleaning the machine After 180 preparations or 80 switch-on rinses, the E6 will prompt you to clean it. CAUTION If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.
E6/E60 – Quick Reference Guide Descaling the machine The E6 builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcifica- tion depends on the hardness of your water. E If you are using a CLARIS Smart filter cartridge, you will not be prompted to descale.
Page 7
E6/E60 – Quick Reference Guide T Completely dissolve 3 JURA descaling tablets in a receptacle holding 500 ml of water. This may take several minutes. T Pour the solution into the empty water tank and insert it into the machine. ‘Open switch’...
T Remove the water tank. T If you use a CLARIS Smart filter cartridge, remove this. T Completely fill the water tank and dissolve 3 JURA descaling tablets in it. T Leave the water tank with the descaling solution for several hours (e.g.