Omron SYSMAC CS1W-CLK13 Operation Manual page 98

This section describes the settings required for starting communications. These basic settings are required both for data
links and the message service. Carry out the settings described here before turning ON power to the Controller Link
Unit.
4-1 CS-series Optical Ring Controller Link Units . . . . . . . . . . . . . . . . . . . . . . . .
4-1-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1-2 Setting the Unit Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1-3 Setting the Node Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1-4 Setting the Transmission Path Format . . . . . . . . . . . . . . . . . . . . . . .
4-2 CVM1 and CV-series Optical Ring Controller Link Units . . . . . . . . . . . . . .
4-2-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-2-2 Setting the Unit Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-2-3 Setting the Node Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-2-4 Setting the Transmission Path Format . . . . . . . . . . . . . . . . . . . . . . .
4-2-5 Creating I/O Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparations for Communications
SECTION 4
76
76
77
78
79
79
80
81
82
82
83
75