Charger Recognition Test - Motorola TETRA MTH800 Basic Service Manual

TEST SETUP & TESTING 380-430MHz

Charger Recognition Test

• Turn the terminal ON.
• Connect the Rapid Travel Charger accessory connector to the handset. Check
• Connect the Vehicle Power Adapter (VPA) Charger accessory connector to the
• Connect the handset to the Desktop Charger. Check whether the LCD display
• Place the handset in the Digital Car Kit cradle. Verify that the car ignition
• Verify that the battery charger is in progress (the process advance is indicated
Press the "ON/OFF" key. The terminal should turn OFF.
MTH800 TETRA Handportable Terminal / Basic Service Manual
whether the LCD display shows "charger connected" and that the keypad
back-light is turned ON.
handset. Check whether the LCD display shows "charger connected" and that
the keypad back-light is turned ON.
shows "charger connected" and that the keypad back-light is turned ON.
switch is turned ON. Check whether the LCD display shows "Car Kit
connected", and that the keypad back-light is turned ON.
on the Battery Strength icon).
4.1 - 15